New Sennheiser MD 445 vocal mic

Get maximum presence and feedback rejection

Sennheiser MKE435+sehr+klein

The stage is incredibly loud, with the instruments seeming to acoustically close in on the vocalist… – these are challenging environments for which the new MD 445 from Sennheiser was created. The audio specialist’s large-diaphragm, dynamic stage microphone combines a direct, head-on sound with a tight super-cardioid pick pattern, providing not only maximum isolation from other on-stage sound sources but also an extremely high level of feedback resistance. With the high-rejection MD 445, vocalists can effortlessly assert their presence even in the loudest of environments.

“The MD 445 is the most powerful microphone in our MD range,” says Kai Lange, senior product manager with Sennheiser. “If its sister model, the MD 435, is the beauty, the MD 445 certainly is the beast. It effortlessly cuts through loud stage sound and establishes an audibly greater proximity to the vocals. Its direct, high-resolution sound gives vocals a totally new richness, intensity and assertiveness.”

The acoustics of the MD 445 have been tailored to modern stage set-ups with B stages and runways in front of the PA. At the core of the acoustic design is a newly developed voice coil made of lightweight aluminium-copper. Its fast transient response ensures a very detailed, nuanced and transparent sound that is complemented by rich mid-range and bass. The sound is acoustically close, intimate and open, irrespective of how loud the instrument soundscape may be.

Thanks to its high-rejection, super-cardioid pick-up pattern, the MD 445 has enormous gain before feedback. Dynamics are wide at 146 dB(A) and the microphone can handle sound pressure levels of up to 163 dB/1 kHz.

The outstanding acoustics come with a mechanical design that’s built to withstand a life on tour: The MD 445 features a metal casing and has a shock-mounted capsule to protect it from structure-borne noise. A hum compensating coil protects the microphone against electromagnetic interference.

For use with Sennheiser’s wireless transmitters, the capsule of the MD 445 is also available as MM 445 microphone head. Fitted with Sennheiser’s standard capsule interface, the MM 445 can be used with Sennheiser wireless series ranging from the evolution wireless G4 and 2000 series to Digital 6000 and Digital 9000.

The MD 445 microphone and MM 445 microphone head retail at 499 (MSRP) each.

MD 445 Technical Data

  • Transducer principle: dynamic
  • Frequency response: 40 – 20,000 Hz
  • Pick-up pattern: high-rejection, super-cardioid
  • Sensitivity (free field, at 1 kHz): 1.6 mV/Pa; -55.9 dBV/Pa
  • Max. SPL (at 1 kHz): 163 dB
  • Equivalent noise level: 18 dB(A)
  • Dynamic range: 145 dB(A)
  • Nominal impedance (at 1 kHz): 245 Ω
  • Min. terminating impedance: 1 kΩ
  • Connector: XLR-3M
  • Dimensions: ⌀ 47.5 mm x 174 mm
  • Weight: 329 g

www.sennheiser.com